2026 SANY STH1256A

    Appelez pour le prix 
    Prix ​​de location:
    Appeler pour disponibilité
    Localisation de la machine:4601 West 46st StreetTulsa, Oklahoma, États-Unis 74132

    Information sur le vendeur

    Voir les informations du vendeur

    CraneCo Crane Sales

    Contact:Joe Perez

    Téléphone:+1 918-625-1863

    Tulsa, Oklahoma, États-Unis 74102

    veuillez consulter notre site web

    +1 918-625-1863

    Cacher les miniatures

    Description

    (1) New 2024 SANY America Telehandler model STH1056A (10,000lb Capacity) with all Sandard equipment, Enclosed Cab and Open Canopy Available Dimensions: • Maximum Lift Height 56’ 2” 17.13 m • Maximum Forward Reach 42’ 11” 13.08 m • Height, Stowed 8’ 5” 2.56 m • Length, Stowed (without Forks) 20’ 7” 6.28 m • Width 8’ 6” 2.59 m • Wheelbase 11’ 5” 3.49 m • Ground Clearance (Center) 1’ 6” 0.46 m • Ground Clearance (Axle) 1’ 6” 0.45 m • Weight 33,290 lbs 15,100 kg Capacities: • Power 121 hp 90 kW • Torque 360 lbf-ft 488 Nm • Electrical System 24 volt • Hydraulic Tank Capacity 33 gal 124 L • Hydraulic System Capacity (with Tank) 42 gal 159 L • Fuel Tank Capacity 36 gal 135 L Components: • Engine Deutz TCD3.6 • Transmission Dana VDT12000 • Axles F/R Dana 223 / 213 • Hydraulic Pump Kawasaki Load Sense Piston Pump • Hydraulic Manifold Parker • Exhaust aftertreatment (DPF+SCR (DEF required)) PowerTrain: • Powershift transmission • Planetary limited slip axles • Full-time 4 wheel drive • Gear selector lever (Steering-column) • Manual shift • Service brake, 4-wheel, wet-disc, spring applied, hydraulic release • Parking brake, same as service brake • Cushioned solid tires Hydraulic: • Full variable load-sensing system • Single electric over hydraulic joystick controls • Axial piston pump • Hydraulic quick coupler lines for auxiliary hydraulics • Self-leveling forks • Three driver-selectable steering modes (2W, 4W, 4W-Crab) Cabin: • ISO certified ROPS/FOPS Canopy • Emergency hammer (closed cabin only) • Rubber isolated cab mounts • Fully enclosed cab with automatic heat and air conditioning • camer s Digital instrument display • Mechanical suspension seat • Seat belt, 3 inch retractable • Dual armrests • Rear-view camera • 2-speed fan • Dedicated display for rear-view Electrical: • 24v electrical system • 2-12 volt batterie Productivity: • Back up camera • Reverse sensing system • Full 4-wheel fender package • LED work lights on cab and boom • Flashing beacon • Lifting hook • Frame leveling 10 degrees side to side • Rear-Axle stabilization system • Axle-mounted front stabilizers Performance: • Maximum Lift Capacity 10,000 lbs 4 536 kg • Lift Capacity at Maximum Height 5,000 lbs 2 268 kg • Lift Capacity at Maximum Reach 3,000 lbs 1 361 kg • Boom (Raise/Lower) 14 seconds / 11 seconds • Boom (Extend/Retract) 16 seconds / 15 seconds • Frame Leveling +/- 10 degrees • Maximum Drive Speed 17 mph 28 kph • Outside Turning Radius (4WS) 14’ 1” 4.30 m • Auxiliary Hydraulic Flow 17 gpm 63 L/min • Auxiliary Hydraulic Pressure 2,466 psi 17 MPa • Standard Tire Size 14.00-24 • Warranty 3-Year or 3,000 hour “whichever comes first” Factory Warranty Options: • 60” Carriages • Forks 60”

    Spécifications

    Année2026
    fabricant SANY
    ModèleSTH1256A
    EtatNeuf
    Heures0
    Capacité en carburant136,27 L
    Capacité5 443,11 kg
    Portée avant maximale12,8 m
    Hauteur de levage maximale17,07 m
    Poids d'opérations16 326,6 kg
    BalanciersOui
    Nombre de balanciers2
    Hydraulique auxiliaireOui
    Attache rapideOui
    Attache rapideOui
    Type de chariotStandard
    Nivellement / Inclinaison du châssisOui
    Bouton poussoir pour inclinerOui
    Essieu des roues3,35 m
    Type de pneuSolid
    Protège-conducteurOui
    Garde au sol30,48 cms
    Protection contre le retournementOuvert
    Garde-bouesOui
    Nombre de garde-boues4
    MoniteurOui
    Siège à suspension mécaniqueOui
    Réglages ergonomiquesOui
    Motricité4WD
    Travel Speed Empty30,58 km/h
    Nombre de vitesse4
    Chevaux (cv)96,94 kW
    Fabricant de MoteurCUMMINS
    Modèle de MoteurQSF3.8
    Norme moteurUSA Tier 4 Final
    Longueur (pour expédier)6,1 m
    Largeur (pour expédier)2,44 m
    Hauteur (pour expédier)2,44 m
    Poids16 099,81 kg
    Année2026|
    fabricant SANY|
    ModèleSTH1256A|
    EtatNeuf|
    Heures0|
    Capacité en carburant136,27 L|
    Capacité5 443,11 kg|
    Portée avant maximale12,8 m|
    Hauteur de levage maximale17,07 m|
    Poids d'opérations16 326,6 kg|
    BalanciersOui|
    Nombre de balanciers2|
    Hydraulique auxiliaireOui|
    Attache rapideOui|
    Attache rapideOui|
    Type de chariotStandard|
    Nivellement / Inclinaison du châssisOui|
    Bouton poussoir pour inclinerOui|
    Essieu des roues3,35 m|
    Type de pneuSolid|
    Protège-conducteurOui|
    Garde au sol30,48 cms|
    Protection contre le retournementOuvert|
    Garde-bouesOui|
    Nombre de garde-boues4|
    MoniteurOui|
    Siège à suspension mécaniqueOui|
    Réglages ergonomiquesOui|
    Motricité4WD|
    Travel Speed Empty30,58 km/h|
    Nombre de vitesse4|
    Chevaux (cv)96,94 kW|
    Fabricant de MoteurCUMMINS|
    Modèle de MoteurQSF3.8|
    Norme moteurUSA Tier 4 Final|
    Longueur (pour expédier)6,1 m|
    Largeur (pour expédier)2,44 m|
    Hauteur (pour expédier)2,44 m|
    Poids16 099,81 kg|
    montrer en paragraphe

    Your current browser cannot run our content, please make sure your browser is fully updated or try one of the browsers below.

    Your browser is not supported

    Microsoft Edge

    Google Chrome

    Mozilla Firefox